2019 Evinrude 15 HP E15HPGX

The 2019 Evinrude E15HPGX belongs to Evinrude's High Output series, tuned past a standard 15 hp setup for extra power and speed. This is the 25-inch long-shaft, graphite-finish build, starting on electric or rope with a remote throttle, though tiller control is available for it too.

Engine details

A 2.992 x 2.5 in bore and stroke gives this 2-cylinder E-TEC direct-injection engine 35.2 cubic inches (577 cc) of displacement, and its final gear of 2.15:1 carries full-throttle operation through 5,000-5,500 rpm. The 56-amp alternator sets aside 15 amps for charging. At the transom, high-speed power tilt covers a 75-degree range and trims from -6 to 15 inches; the whole motor weighs 184 lbs.

Why the design matters

E-TEC engines skip belts, camshafts, and exhaust valves — fewer parts to wear out than a comparable four-stroke needs. The Straight Leading Edge gearcase sheds weeds at the front while pulling water more efficiently, which keeps the engine running cooler. An auto-winterization cycle fogs the motor at season's end without a dealer visit.

Running it

Evinrude/Johnson XD-100 oil fills the 1.7-gallon tank, and 87 octane is the fuel to use. Evinrude's 3-year, non-declining warranty and EPA 2013 / CARB 3-Star emissions certification both apply.

What shaft length is this? 25 inches, the long-shaft version.

Can I run this with tiller steering? Yes, tiller control is available alongside the remote setup.