In Stock
2018 Yamaha F20 Portable Tiller ES F20SEHA Ouboard Motor
excl. VAT – import VAT and duties are payable on delivery to Switzerland · change country
United Kingdom · Ireland · Germany · France · Netherlands · Belgium · Spain · Italy · Portugal · Austria · Czech Republic · Poland · Sweden · Denmark · Finland · Greece · Hungary · Romania · Slovakia · Switzerland · Norway
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Rather than a console, this F20SEHA is worked by hand through a tiller handle right at the stern; it runs on a 15-inch shaft, starts electrically, and this listing gives it a dry weight of 117 lbs.
Tiller handling on a short shaft
A 15-inch shaft keeps the motor sized for smaller, lighter hulls, which is a different fit than the 20-inch tiller trims Yamaha builds on this same engine, so confirm your transom before assuming either will interchange. Trim adjusts between -4 and +16 degrees and tilt tops out at 67 degrees, both adjusted manually right where the tiller handle sits rather than through any remote control.
A pressurized wet-sump oil pump, CDI microcomputer ignition and an automatic system that trims rpm back on overheat or low oil pressure all support reliable running, and a built-in fitting lets the engine be flushed with fresh water between outings.
Because this is the electric-start tiller build, it suits boats that already carry a battery for other onboard accessories, letting the starter draw off that same bank rather than needing a dedicated pull-cord backup for reliability.
Questions buyers ask
What's the warranty? Three years of coverage applies to pleasure and government use, one year to commercial.
Does it ship with a propeller? Yes, an aluminum propeller along with the tiller handle and fuel tank.
What's the alternator output? 10 amps.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Our 2-year warranty covers internal lubricated components, cylinder heads and engine block from delivery, in addition to your statutory rights.
Full terms: 2-year warranty · returns