In Stock
2018 Mercury 5 Hp 5MLHA Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The 2018 Mercury 5 Hp 5MLHA Outboard Motor pairs the same 5 horsepower single-cylinder engine as the 5MH with a 20-inch long shaft, a built-in alternator with charging cord, and a high-thrust propeller, aimed at heavier hulls and sailboat auxiliary power.
What the high-thrust setup changes
A high-thrust propeller with a 6.0-inch pitch trades some top speed for pulling power at low rpm, which suits a sailboat being pushed through the water rather than a light jon boat planing out. The engine itself displaces 123 cc, which Mercury also lists as 7.5 cubic inches, through a 59 by 45 millimeter bore and stroke, reaching 4500 to 5500 rpm at full throttle on a carburetor with digital CD ignition and electronic spark advance. Lubrication runs through a trochoid pump, and charging comes built in: a cord-equipped alternator rated 4 amps and 50 watts, wired in rather than offered as an installable option the way it is on the 5MH.
Fit and condition
The 20-inch shaft here is longer than Mercury's short-shaft 5 horsepower options, so check your transom height before ordering rather than assuming it will fit. Saltwater-rated construction and a 2.15:1 gear ratio carry over from the rest of the 5 horsepower line, and this motor has no internal battery. At 58 pounds dry, it is backed by Mercury Marine's three-year warranty, same as the rest of the lineup it belongs to.
Specifications
| MODEL | 5MLHA |
| MODEL YEAR | 2018 |
| SKU | 5MLHA-18 |
| WEIGHT | 58.0000 |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 5hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 123 cc (7.5 cubic inches) |
| BORE AND STROKE | 59 x 45 mm (2.32 x 1.77 inches) |
| FULL THROTTLE RPM RANGE | 4500-5500 |
| IGNITION SYSTEM | Digital CD Ignition w/Electronic Spark Advance |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 Octane (up to 10% ethanol content) |
| FUEL TANK / FUEL LINE | 0.3 US Gallon (1.15 liter) |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 15 fl. Oz. (450 ml) |
| LUBRICATION | Trochoid Pump |
| ALTERNATOR | 4 / 2 amp / 50 / 25 watt with Charging Cord |
| COOLING SYSTEM | Water-Cooled, Thermostatically Controlled |
| SALTWATER RATED | YES |
| GEAR RATIO | 2.15:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (forward mounted shift lever) |
| PROPELLER | 6.0″ Pitch High Thrust 3-Blade Aluminum |
| INTERNAL BATTERY | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns