In Stock
2018 Mercury 15 Hp 15MLH Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Mercury's 2018 15MLH weighs in at 118 lb and pairs a pull-start, 15 HP four-stroke engine with the longer of the two shaft lengths in this manual-start family. A tiller handle and manual trim keep the controls simple, and the powerhead is the same 21.4-cubic-inch design used across Mercury's 15 HP range.
What to check before buying
This unit is built with the long shaft option, so confirm that length against your boat's transom height before ordering rather than assuming the shorter version in this lineup will fit. An alternator kit for battery charging is available as a separate, optional purchase rather than standard equipment, and full throttle on this carbureted engine falls between 5400 and 5600 RPM.
Build and coverage
A 2.15:1 gearcase turns a 3-blade aluminum propeller sized for this powerhead, and saltwater-rated construction covers the water passages and fittings. Mercury backs this engine with a three-year warranty; confirm the exact shaft length with us before ordering if your transom measurement is close to the line.
Is this the short-shaft or long-shaft version? The long-shaft version.
Can I add battery charging later? Yes, an alternator kit is available as a separate purchase.
Is steering handled by a tiller or remote controls? A tiller handle, with forward-neutral-reverse shifting built directly into the grip rather than a separate shift lever.
Specifications
| MODEL | 15MLH |
| MODEL YEAR | 2018 |
| SKU | 15MLH-18 |
| WEIGHT | 118.0000 |
| MANUFACTURER | Mercury |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 15hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 21.4 / 351 |
| BORE AND STROKE | 2.40 x 2.36in |
| FULL THROTTLE RPM RANGE | 5400-5600 |
| IGNITION SYSTEM | CDI w/electronic spark advance |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | 87 octane/up to 10% ethanol |
| FUEL TANK / FUEL LINE | 6.6 / 25 |
| OIL TYPE | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| OIL CAPACITY | 1 Quart (1000 ml) |
| LUBRICATION | Trochoid Pump |
| ALTERNATOR | Optional 12 amp / 138 watt |
| COOLING SYSTEM | Water-Cooled, Thermostatically Controlled |
| SALTWATER RATED | YES |
| GEAR RATIO | 2.15:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (shift in tiller handle) |
| PROPELLER | 9.2″ Diameter X 9.1″ Pitch 3-Blade Aluminum |
| INTERNAL BATTERY | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns