2018 Evinrude E-TEC 30 HP E30DRGL Outboard Motor

The 2018 Evinrude E30DRGL moves this 30 HP engine to the longer 20-inch shaft and keeps an electric-and-rope starter, though trim and tilt here stay manual rather than power-assisted.

A middle-weight build at the longer shaft length

Dry weight is 154.32 pounds. Bore and stroke measure 2.992 by 2.5 inches for the familiar 577 cc two-cylinder E-TEC block, driving a 2.15:1 gear set, with the engine capable of 6,000 RPM at the top of its 5,500 RPM-plus range, through tiller steering.

Starting and trim, and what feeds the engine

Because trim is set by hand instead of a switch, budget a moment to adjust running angle before heading out on the water. Fuel is 87-octane unleaded gasoline, and the engine runs on Evinrude/Johnson XD-100 oil fed by multi-point targeted oiling, with the 56-amp alternator reserving 15 net dedicated. Cooling is water-based, with a saltwater rating that covers coastal trips as well as inland lakes.

Condition

This E30DRGL is new, not used or refurbished, combining an electric starter with manual trim adjustment rather than offering both powered, a configuration not sold elsewhere in this family.

Is starting electric? Yes, electric with a rope-pull backup. Is trim power-adjusted? No, it's manual on this configuration. What's the dry weight? 154.32 pounds.

Specifications