2018 Evinrude E-TEC 30 HP E30DGTL Outboard Motor

Name: 2018 Evinrude E-TEC 30 HP E30DGTL Outboard Motor
Brand: Evinrude
Price: 2626.34 EUR
Availability: InStock

Brand: Evinrude

Condition: New

€2,626.34

Freight included, insured road freight within the UK & Europe (rates)

€2,626.34 delivered across UK & Europe

ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
Insured European road freight delivery with hydraulic tail-lift service
Dispatches in 1–2 business days from our UK & European Logistics Centre
Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)

Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The 2018 Evinrude E30DGTL brings 30 HP to a 20-inch long shaft, pairing electric-and-rope starting with power trim and tilt, the fully-equipped setup in this horsepower class.

What a ready-to-run build weighs

Dry weight is 187.39 pounds. Displacement totals 577 cc from a bore and stroke of 2.992 by 2.5 inches on this two-cylinder E-TEC, shifting forward, neutral, and reverse through a 2.15:1 ratio, with the tachometer climbing past 5,500 toward a 6,000 RPM ceiling.

Fuel, lubrication, and electrical load

Fuel is 87-octane unleaded gasoline, and the recommended oil is Evinrude/Johnson XD-100, carried at 1.7 quarts and circulated through multi-point targeted oiling. Fifty-six amps total come from the alternator, 15 of them net dedicated. This engine is water cooled and rated for saltwater use, with power trim and tilt adjusted from a switch rather than by hand.

Condition and what's not included

This E30DGTL is new, not used or refurbished, and ships as the powerhead and controls described here rather than with a boat or rigging kit attached.

How is trim adjusted here? By a powered switch; there is no manual lever on this build. Is it rated for salt water? Yes. How does it start? Electric, with a rope-pull backup. What's the dry weight? 187.39 pounds.

Specifications

MODEL	E30DGTL
MODEL YEAR	2018
SKU	E30DGTL
WEIGHT	187.39 lb
MANUFACTURER	Evinrude
COUNTRY OF MANUFACTURE	United States
HORSEPOWER	30hp
SHAFT LENGTH	20″ (Long)
STEERING	Tiller
STARTING	Electric and Rope
TRIM & TILT	Power Trim & Tilt
FUEL DELIVERY	E-TEC Direct Injection with stratified low RPM combustion mode
FUEL TANK	External
CYLINDER(S)	2
DISPLACEMENT	577 cc (35.2 cubic inches)
BORE AND STROKE	76 mm x 64 mm (2.992 x 2.5 inches)
FULL THROTTLE RPM RANGE	5,500-6,000 RPM
FUEL TYPE	Unleaded Gasoline (87 octane)
OIL TYPE	Evinrude / Johnson XD-100 Oil
OIL CAPACITY	1.7 qt (1.6 L)
LUBRICATION	Multi-Point Targeted Oiling
ALTERNATOR	56 Amps Total / 15 Amps Net Dedicated
COOLING SYSTEM	Water Cooled
SALTWATER RATED	Yes
GEAR RATIO	2.15:1
GEAR SHIFT	Forward, Neutral, Reverse

Startup & Installation Checklist

Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns