In Stock
2018 Evinrude E-TEC 25 HP E25DRS Outboard Motor
incl. 23% VAT (Portugal) · change country
United Kingdom · Ireland · Germany · France · Netherlands · Belgium · Spain · Italy · Portugal · Austria · Czech Republic · Poland · Sweden · Denmark · Finland · Greece · Hungary · Romania · Slovakia · Switzerland · Norway
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The 2018 Evinrude E25DRS is the white-finished twin to the rope-start, manual-trim 25 HP build above, sharing its short 15-inch shaft for buyers who would rather skip wiring an electric starter altogether.
A lighter build, in white
Dry weight sits at 150 pounds. The inline two-cylinder block displaces 577 cc from a 76-by-64 mm bore and stroke, geared at 2.15:1, and runs up through a 5,500-to-6,000 RPM full-throttle band, worked through tiller steering and mechanical controls rather than electronic shift.
Trim and electrical specifics
By hand, trim covers a -4 to 16 degree span, and tilt reaches 65 degrees at the top end, with no switch involved anywhere in the adjustment. The 56-amp alternator reserves 15 amps net dedicated for a fishfinder or similar accessory, and Evinrude/Johnson XD-100 oil is specified for lubrication.
New, finished in white, and what to expect at the ramp
Without an electric starter, pull-cord technique matters for a clean start, something worth practicing before the first trip out. This E25DRS is new, running on unleaded fuel, with Evinrude's 3-year, non-declining warranty covering it from purchase on top of its simple, rope-start build.
What color does this one come in? White. Is power trim available here? No, trim and tilt are entirely manual. What's the dry weight? 150 pounds.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Our 2-year warranty covers internal lubricated components, cylinder heads and engine block from delivery, in addition to your statutory rights.
Full terms: 2-year warranty · returns