In Stock
2017 Yamaha VMAX SHO 225 HP 4-Stroke 25″ (L)
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This is a used 2017 Yamaha 225 HP V MAX SHO, a 4.2-liter V6 four-stroke with a 25-inch shaft, professionally inspected and serviced before listing. It shows 194 hours and is described in excellent, like-new condition.
Inspection results on this unit
Compression reads approximately 207 PSI across all cylinders with uniform readings, and a leak-down test came back at 2-4 percent across the board, both signs of an engine in good mechanical health for its hours. It has not been repainted, has seen freshwater use only, shows no corrosion, and had its lower unit inspected during servicing.
What ships with it
A control box, wiring harness, key switch, Yamaha gauges where applicable, a stainless propeller, power trim and tilt hardware, and the manual if available make up the included package, and the unit arrives ready to mount and run.
What boats does this suit? The seller recommends it for bass, bay and center console boats, offshore fishing boats and other multi-species or performance fishing applications.
What's the alternator rating? Up to 70 amps.
Weight? Dry weight is approximately 557 lbs (253 kg); shipping weight is approximately 561 lbs. Model number is 523.
Warranty? A 3-year limited warranty, with the pre-shipment compression and diagnostic report included.
Fuel system is EFI with electric start, remote steering and remote controls, and minimum recommended fuel is 89 octane unleaded.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Yamaha |
| Year | 2017 |
| Model Series | V MAX SHO |
| Horsepower | 225 HP |
| Engine Type | 4-Stroke DOHC |
| Cylinders | V6 |
| Displacement | 4.2L (4,169 cc) |
| Fuel System | Electronic Fuel Injection (EFI) |
| Starting System | Electric Start |
| Steering | Remote |
| Control Type | Remote Control |
| Trim & Tilt | Power Trim & Tilt |
| Shaft Length | 25″ Extra Long (X Shaft) |
| Alternator Output | Up to 70 Amps |
| Fuel Requirement | Unleaded Gasoline (Minimum 89 Octane Recommended) |
| Dry Weight | Approx. 557 lbs (253 kg) |
| Shipping Weight | Approx. 561 lbs |
| Model Number | 523 |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns