In Stock
2017 Yamaha F225 4.2L Offshore Digital Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Running Yamaha's digital electronics, this 2017 outboard puts 225 hp through a 4.2-liter, 60-degree V6, pulling 70 amps from its alternator while the dry scale lands at 562 lbs on its 25-inch shaft, one of the lighter picks in this larger-displacement V6 lineup.
Controls and steering
A digital helm and matching console wiring are needed for this trim, since it skips cable-and-lever controls entirely; retrofitting an older boat for digital control after the fact is rarely worth the cost compared with choosing the mechanical version instead. The compression ratio here runs 10.3:1, and the gear set reduces at 1.75:1.
Saltwater durability
With a filter in place this block takes 6.3 liters of oil, 6.0 liters bare, fed by DOHC injection with variable camshaft timing and electric starting. Features such as sacrificial anodes, a water-cooled rectifier, and forged pistons are aimed at a full season of saltwater running without major upkeep, and the tilt range on this trim tops out at 67 degrees. Boats moving up from a smaller block onto this one usually need little beyond a transom check and a fresh set of control cables.
Warranty here runs three years of pleasure coverage, matching that for government use, and drops to one year for commercial use. This ships new; confirm your helm wiring and overall rigging with us before ordering.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns