In Stock
2017 Mercury 20 HP 20ELHPT Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Adding power tilt to the long-shaft 20 HP layout, the 2017 Mercury 20 HP 20ELHPT Outboard Motor tilts through a range of roughly 6 degrees below level to 75 degrees up, operated electrically rather than by hand.
What power tilt changes
Power tilt lets you raise and lower the motor at the touch of a switch, useful for shallow-water maneuvering or trailering without physically lifting a motor that carries more hardware than a manual-tilt 20 HP tiller motor does. That added hardware is part of what sets this configuration apart from the plain long-shaft version of the same engine.
Still a tiller motor underneath
Steering, throttle, and forward-neutral-reverse shifting stay on the tiller handle; only the tilt function is powered. The 20-inch shaft suits a taller transom, and electric start fires the engine from the same handle rather than a separate ignition switch.
Why power tilt is worth the added weight for some owners
Owners who trailer frequently or who fish shallow water where the motor needs raising and lowering often several times a trip tend to find power tilt worth the extra hardware, since it saves repeated manual effort that a plain tiller motor would otherwise require.
Common questions
What is the tilt range? About 6 degrees below level up to 75 degrees, power-operated.
What model year is this? 2017, sold new with Mercury's standard three-year warranty.
Specifications
| Model | 20ELHPT |
| Model Year | 2017 |
| SKU | 20ELHPT-17 |
| Weight | 130.0000 |
| Manufacturer | Mercury |
| Country of Manufacture | Japan |
| Horsepower | 20hp |
| Shaft Length | 20″ (Long) |
| Steering | Tiller |
| Starting | Electric |
| Trim & Tilt | Power Tilt |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 351 cc (21.4 cubic inches) |
| Bore and Stroke | 61 x 60 mm (2.40 x 2.36 inches) |
| Full Throttle RPM Range | 5400-6100 |
| Ignition System | Digital CD Ignition w/Electronic Spark Advance |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | 87 Octane (up to 10% ethanol content) |
| Fuel Tank / Fuel Line | 6.6 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | SAE 10W-30 (Mercury 4-Stroke Outboard Oil) |
| Oil Capacity | 1 Quart (1000 ml) |
| Lubrication | Trochoid Pump |
| Alternator | 12V 138W 12A (standard on electric start models) |
| Cooling System | Water-Cooled, Thermostatically Controlled |
| Saltwater Rated | YES |
| Gear Ratio | 2.15:1 |
| Gear Shift | Forward-Neutral-Reverse (shift in tiller handle) |
| Propeller | 9.2″ Diameter X 9.1″ Pitch 3-Blade Aluminum |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns