In Stock & Ready to Freight Outboard Motors

Tohatsu 9.9HP | MFS9.9EEFTUL

Part no: #MFS9.9EEFTUL
Brand: Tohatsu
Condition: New
€4,134.98
Freight included, insured road freight within the UK & Europe (rates)
€4,134.98 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Add the 25-inch ultra-long shaft to power tilt and you land on the Tohatsu 9.9HP MFS9.9EEFTUL, roughly 121 lbs, with electric start and a manual backup both present.

Why both features together

Boats needing this shaft's extra reach often also change load or trim through the day, which is exactly where push-button tilt earns its keep over a hand lever at the stern. This stays the 333cc EFI engine, spinning 5400 up to 6100 rpm at full throttle, same as the rest of this family.

Weight and what's in the box

At roughly 121 lbs, the combination of the long shaft and the tilt mechanism makes this one of the heavier builds covered here. Parts included: the propeller, a 3.1-gallon tank and its fuel line, the power tilt hardware, a tool kit, a lanyard-style kill switch, an owner's manual, and the charging circuit that backs electric start. A 5-year Tohatsu warranty applies, the same term stated across this whole engine family.

Is manual start available if the battery dies? Yes, a manual start method is retained.

Does it include a fuel tank? Yes, the 3.1-gallon tank and its fuel line are part of the package.

Does it have power tilt? Yes, that's the feature this version adds over a plain long-shaft motor.

Shaft length? 25 inches, the longest offered on this engine.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns