In Stock
Tohatsu 9.9HP MFS9.9EEFL Outboard Motor
incl. 20% VAT (United Kingdom) · change country
United Kingdom · Ireland · Germany · France · Netherlands · Belgium · Spain · Italy · Portugal · Austria · Czech Republic · Poland · Sweden · Denmark · Finland · Greece · Hungary · Romania · Slovakia · Switzerland · Norway
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Here the Tohatsu 9.9HP MFS9.9EEFL is described purely by its numbers: a 20-inch shaft, electric start, and a weight of 106 lbs on the 333cc EFI engine shared across this family. Unlike some of its siblings, this particular listing doesn't break out a separate standard-features list, so what follows works from the specifications alone.
Reading this spec sheet
Full throttle on this EFI engine spins from 5400 up to 6100 rpm under load. A 20-inch shaft places this in the standard mid-length category for this engine family, suited to an average transom height. Starter is listed simply as electric, without a separate manual-start note added on, so plan your battery accordingly before a long day on the water.
Before ordering
Confirm your transom suits a 20-inch shaft, since this spec sheet doesn't offer an alternate length under this exact model code. At 106 lbs, it sits toward the middle of the weight range among EFI motors covered in this batch, noticeably lighter than the power-tilt versions in the same family. If you're choosing between a carbureted and an EFI motor generally, EFI tends to start more reliably in cold weather, with less fiddling at the choke. Warranty runs 5 years.
Is this carbureted? No, it runs EFI.
What's the weight? 106 lbs.
Does it have power tilt? Not named in this listing; treat trim and tilt as manual.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Our 2-year warranty covers internal lubricated components, cylinder heads and engine block from delivery, in addition to your statutory rights.
Full terms: 2-year warranty · returns