In Stock
Tohatsu 9.8HP MFS9.8BEFS Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This is the spec-sheet listing for the Tohatsu 9.8HP MFS9.8BEFS: a 15-inch shaft, tiller steering, electric-plus-manual start, at 88 lbs. Like a couple of its sibling listings, the core numbers here are what distinguish it rather than a written features list.
What the numbers mean for fit
A 15-inch shaft is the short option in this family, intended for boats with a lower transom. Two cylinders add up to 209cc, run through a carburetor, with full throttle landing between 5000 and 6000 rpm on this engine. At 88 lbs it carries a bit less weight than the long-shaft and power-tilt variants in the same family, simply because it uses less shaft and simpler hardware overall.
Before you order
Measure your transom from the top edge down to the waterline and compare it against this 15-inch figure rather than assuming by boat type alone; getting the length wrong is one of the most common fitting errors with motors this size. Electric start is backed by a manual method if the battery ever runs down out on the water. Warranty coverage runs 5 years from Tohatsu, the same term stated for this exact model.
Is there a backup start method? Yes, manual start is retained alongside electric.
Steering type? Tiller, hand-operated at the motor itself.
What's the displacement? 209cc, the same twin-cylinder carbureted engine used across this family.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns