In Stock
Tohatsu 30HP | MFS30CETS
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The MFS30CETS brings Tohatsu's 30hp four-stroke to a 15-inch shaft with power trim and tilt, tipping the scale at 179 lbs as the short-shaft counterpart to the long-shaft MFS30CETL. Full throttle on the 526cc three-cylinder tops out between 5250 and 6250 rpm.
Who it suits
Boats with a lower transom that still want power trim and tilt, rather than adjusting running angle by hand, are the target for this configuration.
Mounting height is not a minor detail
Fifteen inches suits a lower transom than the long-shaft version carries, and getting that wrong changes how deep the propeller sits in the water, which shows up as lost performance and poor fuel economy over a season.
Electrical system check
Electric start with manual backup and power trim and tilt both rely on the boat's battery and wiring, so a quick check of battery condition before the season starts is worth the time.
What's included
This configuration bundles power trim and tilt with a means of keeping the battery charged, a modest set of tools and spares, plus a kill switch on its lanyard and the printed manual.
This one can be rigged with a tiller handle or wired for remote mechanical control instead. Induction is EFI, and Tohatsu's 5-year warranty applies.
Common question
How much lighter is the short-shaft version? A few pounds lighter than the long-shaft MFS30CETL, with the same engine and features.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns