In Stock & Ready to Freight Outboard Motors

Tohatsu 20HP Outboard | MFS20EEFS

Part no: #MFS20EEFS
Brand: Tohatsu
Condition: New
€4,402.40
Freight included, insured road freight within the UK & Europe (rates)
€4,402.40 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The Tohatsu MFS20EEFS is a 20 hp four-stroke with tiller steering and a single electric starter on a 15-inch shaft, weighing 104 lbs, built to run on standard unleaded fuel or fuel blended with up to 10% ethanol.

What's inside the block

The engine uses a steel crankcase with aluminum alloy pistons and cylinders, a pairing chosen for strength without piling on weight. Running it on pump fuel blended up to 10% ethanol keeps it compatible with most marina and roadside fuel sources without special blending.

Shaft and starting

A 15-inch shaft is the short option in this configuration, suited to boats with a lower transom such as inflatables and smaller craft; measure the transom before ordering this motor. Tiller control keeps throttle and steering at the motor, and the electric starter turns the engine over with a key rather than a cord.

What ships with it

The crate holds the propeller, an external fuel tank sized at 3.1 gallons, a hose for it, the charging system, a tool kit, a kill-switch lanyard, and the owner's manual. The two-cylinder, 333cc EFI block pulls the throttle up toward 6,100 rpm, under a 5-year Tohatsu warranty.

Q: Is a separate fuel tank needed? No, a 3.1-gallon tank and its hose ship with this motor already, ready to fill and run.

Q: What's the engine's full-throttle range? 5,400 to 6,100 rpm, from the two-cylinder, 333cc EFI block under the cowling.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns