In Stock & Ready to Freight Outboard Motors

Tohatsu 20HP | MFS20EWEPTL

Part no: #MFS20EWEPTL
Brand: Tohatsu
Condition: New
€4,669.81
Freight included, insured road freight within the UK & Europe (rates)
€4,669.81 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

White cowlings set the Tohatsu MFS20EWEPTL apart on the console-steered side of the 20 hp line, an engine built with an electric starter, a pull cord in reserve, and power tilt on a 20-inch shaft, weighing 116 lbs.

Rigging for a console

Console steering here routes cables from the motor to a helm control head, so check that hardware is already on the boat, or plan to add it, before picking this over a tiller version of the same engine. Like other console-steered 20 hp units, it leaves the crate without a sidemount box, a tank, or a line, since those are matched to whatever control run is already installed.

Inside the crate

You get the propeller, the steering arm, white-finish cowling panels, the charging circuit, and the power-tilt hardware, finished out with a tool kit, a kill-switch cord, and a printed manual. The engine itself is a two-cylinder, 333cc EFI design, topping out around 6,100 rpm at full throttle after starting near 5,400.

Q: What color does this come in? White cowling panels, standard on the EWEPTL.

Q: Does it need a battery to run? For the electric starter, yes, though the pull cord works without one if needed.

Q: Warranty period? Five years, from Tohatsu, covering this engine from the date of purchase.

Q: What's the weight with the power-tilt hardware attached? 116 lbs as equipped, in line with other console-steered, 20-inch-shaft units in this family.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns