In Stock
Tohatsu 20HP | MFS20EWEPTL
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
White cowlings set the Tohatsu MFS20EWEPTL apart on the console-steered side of the 20 hp line, an engine built with an electric starter, a pull cord in reserve, and power tilt on a 20-inch shaft, weighing 116 lbs.
Rigging for a console
Console steering here routes cables from the motor to a helm control head, so check that hardware is already on the boat, or plan to add it, before picking this over a tiller version of the same engine. Like other console-steered 20 hp units, it leaves the crate without a sidemount box, a tank, or a line, since those are matched to whatever control run is already installed.
Inside the crate
You get the propeller, the steering arm, white-finish cowling panels, the charging circuit, and the power-tilt hardware, finished out with a tool kit, a kill-switch cord, and a printed manual. The engine itself is a two-cylinder, 333cc EFI design, topping out around 6,100 rpm at full throttle after starting near 5,400.
Q: What color does this come in? White cowling panels, standard on the EWEPTL.
Q: Does it need a battery to run? For the electric starter, yes, though the pull cord works without one if needed.
Q: Warranty period? Five years, from Tohatsu, covering this engine from the date of purchase.
Q: What's the weight with the power-tilt hardware attached? 116 lbs as equipped, in line with other console-steered, 20-inch-shaft units in this family.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns