In Stock
Tohatsu 20HP | MFS20EEPTUL
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The Tohatsu MFS20EEPTUL is a 20 hp four-stroke set up for console control rather than a tiller handle: console steering, an electric starter backed by a pull cord if the battery runs down, and power tilt, carried on a 25-inch shaft at 118 lbs.
Fitting it to a deeper transom
Twenty-five inches is a long shaft, built for boats whose transom sits deeper than average; measure straight down from the transom's top edge to the hull bottom before ordering, since shaft length matters more to how the boat runs than the horsepower number does. Being a console-steered model, it does not arrive with a sidemount control box, a tank, or a line in the crate; those get sourced separately to match whatever control run is already on the boat.
What's in the crate
Expect the propeller, the steering arm, the charging system, and the power-tilt hardware, along with a parts and tool kit, a cord for the kill switch, and a printed manual. Power tilt lifts the engine clear of the water at the dock or in shallow water without bolting on a separate hydraulic ram. The block underneath is a two-cylinder, 333cc EFI design that spins up toward 6,100 rpm at the top of the throttle, starting from around 5,400.
Q: Does the control box come included? No; a console-steered 20 hp motor like this ships without the control box, tank, and line, so budget for those on their own.
Q: How long is it covered? Five years under Tohatsu's warranty on this engine.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns