In Stock
Tohatsu 20HP MFS20EEFTS Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Short-shaft tiller control with a backup way to start it sets the Tohatsu MFS20EEFTS apart: a 20 hp four-stroke on a 15-inch shaft, built with an electric starter and a rope in reserve, at 116 lbs.
A shorter shaft, same tiller control
Fifteen inches fits a lower transom than the 20-inch tiller versions of this engine, so measure the boat first rather than matching on horsepower alone. Tiller steering keeps the throttle, shift, and steering together at the motor, with nothing to route to a console.
Starting either way
Turning a key is the normal way to start it, with a pull cord sitting ready if the battery runs low, so neither method depends on the other working correctly. The block is a two-cylinder, 333cc EFI design, climbing toward 6,100 rpm at full throttle, and it carries Tohatsu's 5-year warranty.
Q: Does the rope work even if the battery is flat? Yes, it operates independently of the electrical system entirely.
Q: What size boat does a 15-inch shaft fit? Smaller craft with a lower transom, such as inflatables, dinghies, and some jon boats riding closer to the water.
Q: Is this engine two-cylinder or more? Two cylinders, displacing 333cc total in this EFI block.
Browse the wider Tohatsu outboard motors selection for longer-shaft or console-steered alternatives at this horsepower, including both single and dual starting setups.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns