In Stock
Tohatsu 15HP MFS15EEPTL Outboard Motor
incl. 21% VAT (Spain) · change country
United Kingdom · Ireland · Germany · France · Netherlands · Belgium · Spain · Italy · Portugal · Austria · Czech Republic · Poland · Sweden · Denmark · Finland · Greece · Hungary · Romania · Slovakia · Switzerland · Norway
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This Tohatsu MFS15EEPTL is the 15 hp four-stroke configured for remote mechanical steering, with an electric starter backed by a manual pull cord, a 20-inch shaft, and a running weight of 116 lbs. Think of it as the console-steered counterpart to the tiller-handle versions of the same 15 hp engine.
Before you order
Remote mechanical steering routes cables from the motor to a helm-side control head, so confirm your boat has that hardware, or budget for adding it, before choosing this over a tiller model. The 20-inch shaft should match a standard transom height; measuring first avoids returns and a second round of re-rigging later.
What drives it
Power is a two-cylinder, 333cc EFI engine, and full throttle covers 5,400 through 6,100 rpm on this one. The electric starter means turning a key rather than pulling a cord, with the manual option there if the battery is down. Tohatsu's 5-year warranty applies to this unit.
Q: Will this bolt onto a tiller-rigged boat? Not directly; remote mechanical steering needs a control head and cables that a tiller boat doesn't have installed.
Once it's rigged, treat the break-in period the way you would on any new four-stroke: keep early runs varied in throttle rather than holding one speed for hours, and give the motor a fresh-water flush after any time spent in salt before it goes back into storage.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Our 2-year warranty covers internal lubricated components, cylinder heads and engine block from delivery, in addition to your statutory rights.
Full terms: 2-year warranty · returns