In Stock & Ready to Freight Outboard Motors

Tohatsu 15HP MFS15EEPTL Outboard Motor

Part no: MFS15EEPTL
Brand: Tohatsu
Condition: New
€2,217.41
Freight included, insured road freight within the UK & Europe (rates)
€2,217.41 delivered across UK & Europe
  • ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
  • Insured European road freight delivery with hydraulic tail-lift service
  • Dispatches in 1–2 business days from our UK & European Logistics Centre
  • Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This Tohatsu MFS15EEPTL is the 15 hp four-stroke configured for remote mechanical steering, with an electric starter backed by a manual pull cord, a 20-inch shaft, and a running weight of 116 lbs. Think of it as the console-steered counterpart to the tiller-handle versions of the same 15 hp engine.

Before you order

Remote mechanical steering routes cables from the motor to a helm-side control head, so confirm your boat has that hardware, or budget for adding it, before choosing this over a tiller model. The 20-inch shaft should match a standard transom height; measuring first avoids returns and a second round of re-rigging later.

What drives it

Power is a two-cylinder, 333cc EFI engine, and full throttle covers 5,400 through 6,100 rpm on this one. The electric starter means turning a key rather than pulling a cord, with the manual option there if the battery is down. Tohatsu's 5-year warranty applies to this unit.

Q: Will this bolt onto a tiller-rigged boat? Not directly; remote mechanical steering needs a control head and cables that a tiller boat doesn't have installed.

Once it's rigged, treat the break-in period the way you would on any new four-stroke: keep early runs varied in throttle rather than holding one speed for hours, and give the motor a fresh-water flush after any time spent in salt before it goes back into storage.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns