In Stock
Tohatsu 115HP | MFS115AETL
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Push-button starting and remote throttle control come standard on the Tohatsu MFS115AETL, a 115 HP four-stroke built around a 20-inch shaft for boats already wired for console steering rather than a tiller.
What drives the performance
A Variable Idle System lets the operator dial idle speed anywhere from 650 up to 850 RPM, useful for trolling or holding position near a dock, while the 2.08:1 gear ratio favors torque over top speed, useful when a loaded boat needs to get moving. Tohatsu's 4-2-1 performance-tuned exhaust smooths torque delivery across the RPM band, which translates into a quicker hole shot, less drag once the hull is on plane, and an easier run toward top speed.
Charging and upkeep
A high-output 41-amp alternator backs the 12-volt charging system, a detail that matters for boats running fish finders, bilge pumps, or other electronics alongside the motor. A built-in fresh-water flushing port simplifies rinsing the cooling passages after each outing, and the four-cylinder, 1995cc EFI powerhead runs without a carburetor to tune.
What to confirm before ordering
Because this model ships for remote steering, confirm the boat's console and controls are set up to match before ordering rather than assuming a tiller kit is included. Tohatsu backs the engine with a five-year warranty.
Common questions
Can the idle speed be adjusted? Yes, the Variable Idle System covers a 650 to 850 RPM range. Does this model include a tiller handle? No, it is set up for remote mechanical steering.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns