In Stock
Suzuki 90 Hp 4 stroke
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This 90 hp Suzuki outboard is built around a 4-cylinder engine on a 20-inch shaft, finished in Nebular Black. Weighing 343 pounds, it runs slightly lighter than the 2-cylinder 90 hp configuration offered alongside it, despite carrying two more cylinders in the block.
What to check before ordering
Measure your transom against the 20-inch shaft length, and confirm your boat is rigged for remote throttle and shift controls, since this version is not set up for a tiller handle. Standard propeller rotation means it turns the usual direction; ask us about counter-rotation if you are pairing it on a twin installation.
Running gear
The onboard alternator supplies 27 amps for electronics and battery charging, and power trim and tilt adjust running angle and raise the motor from the helm without manual effort. Electric start pairs with electronic fuel injection for consistent throttle response, and the gear shift runs through the usual forward, neutral and reverse pattern.
How many cylinders does this particular 90 hp version use? Four, compared with two on its sibling configuration.
What finish does the cowling come in? Nebular Black.
What shaft length is fitted here? 20 inches.
A motor in the 90 hp class also calls for checking the transom's structural rating and the hull's maximum horsepower sticker before it goes on, since getting that wrong affects handling far more than cylinder count ever would.
Specifications
| Specification Attributes | |
|---|---|
| HP | 90 HP |
| Cylinders | 4 Cylinder |
| Displacement | 91.7 CI |
| Starting | Electric |
| Controls | Remote |
| Power Trim & Tilt | Power Trim & Tilt |
| Gear Shift | Forward, Neutral, Reverse |
| Propulsion | Standard Rotation |
| Weight | 343 |
| Alternator Output | 27 Amp |
| Color | Nebular Black |
| Shaft Length | 20” |
| Family Type | 4-Stroke |
| Fuel Induction | EFI |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns