In Stock
Suzuki 90 Hp 2 stroke
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This 90 hp Suzuki outboard runs a 2-cylinder engine with electronic fuel injection, finished in white, mounted on a 25-inch shaft. At 352 pounds it is set up with remote controls and power trim and tilt rather than a tiller handle, for a mid-size boat run from a console.
What to check before ordering
Confirm the 25-inch shaft matches your transom height, and that your boat's rigging is built for remote throttle and shift rather than a tiller. The engine family behind this listing is described loosely, so if the exact generation matters for parts or service down the line, confirm it with us before you order.
Running gear
Fuel induction is electronic injection rather than a carburetor, and the alternator puts out 27 amps, enough to run electronics and keep a battery topped up while underway. Electric start and powered trim and tilt mean the motor can be started, trimmed and raised from the helm without manual effort at the transom. Shift runs forward, neutral and reverse, and the propeller turns in the standard direction.
Is the trim and tilt powered or manual on this motor? Both are powered rather than adjusted by hand.
What shaft length does this configuration use? 25 inches.
Does it steer from the motor or a remote station? Remote controls are standard here, not a tiller.
Before mounting any outboard this size, check the boat's rated horsepower against the engine, and have the fuel lines and battery connections inspected so the charging system and remote controls work together from day one.
Specifications
| Specification Attributes | |
|---|---|
| HP | 90 HP |
| Cylinders | 2 Cylinder |
| Displacement | 91.7 CI |
| Starting | Electric |
| Controls | Remote |
| Power Trim & Tilt | Power Trim & Tilt |
| Gear Shift | Forward, Neutral, Reverse |
| Propulsion | Standard Rotation |
| Weight | 352 |
| Alternator Output | 27 Amp |
| Color | White |
| Shaft Length | 25” |
| Family Type | 4-Stroke |
| Fuel Induction | EFI |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns