In Stock
Suzuki 60 Hp 4 stroke
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This Suzuki 60 HP four-stroke outboard runs a three-cylinder, 57.4 cubic inch design, built on a 20-inch shaft and wears a white finish rather than black.
Controls and power
Remote controls handle throttle and shift from the helm, a separate control sets the running angle on its own, and electric start gets the motor going without a manual pull cord. This listing turns a standard rotation propeller, shifting forward, neutral and reverse through a single lever at the helm.
Electrical
All three cylinders draw from electronic fuel injection rather than a carburetor, and a 19 amp alternator supports electronics and trim systems running together without dimming lights or dropping voltage at idle. That charging headroom matters once livewells and electronics are added to the boat.
Who it suits
A three-cylinder four-stroke of this size suits boats that need steady mid-range power for everyday cruising rather than a light portable for occasional use, and the white cowling pairs well with lighter-colored hulls and trim already fitted to the boat.
Fit and weight
Confirm your transom height against the 20-inch shaft before ordering, since this engine weighs around 229 lb and needs the mount height to match for correct running angle at speed.
What color is this version? White. Is this engine a four-stroke? Yes, built as a four-stroke design throughout.
Specifications
| Specification Attributes | |
|---|---|
| HP | 60 HP |
| Cylinders | 3 Cylinder |
| Displacement | 57.4 CI |
| Starting | Electric |
| Controls | Remote |
| Power Trim & Tilt | Power Trim & Tilt |
| Gear Shift | Forward, Neutral, Reverse |
| Propulsion | Standard Rotation |
| Weight | 229 |
| Alternator Output | 19 Amp |
| Color | White |
| Shaft Length | 20” |
| Family Type | 4-Stroke |
| Fuel Induction | EFI |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns