In Stock
Suzuki 6 HP DF6ASW2
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This 2019 model year Suzuki 6 HP DF6ASW2 carries a 15-inch short shaft, tiller steering and manual start, weighing 52.0 lb, and comes with the Suzuki 3-year warranty.
A short-shaft, carbureted portable
The single cylinder runs on a carburetor rather than fuel injection. The integral tank carries roughly a quarter gallon, enough for about 45 minutes of running at full throttle, and an external tank connection is also fitted if you want more range than the built-in tank gives on a longer outing.
Starting and handling
Manual pull-cord start and manual trim keep this motor simple to operate, with a twist-grip throttle and tension control built into the tiller handle. A large gear shift lever and steering friction adjustment round out the controls at the transom, and the lever shifts forward, neutral and reverse from the same handle.
Rated for salt water
Multi-layer corrosion protection and a saltwater rating make this a reasonable choice for coastal use, and an emergency lanyard stop switch is included for basic safety on the water. The single-cylinder design keeps the overall package light and straightforward to service.
What model year is this listing? 2019. Does it need premixed fuel, or does it run on a carburetor alone? It runs on a standard carburetor, not fuel injection, feeding a single cylinder through a conventional float bowl.
Specifications
| MODEL | DF6ASW2 |
|---|---|
| MODEL YEAR | 2019 |
| SKU | DF6ASW2-20 |
| WEIGHT | 52.0 lb |
| MANUFACTURER | Suzuki |
| COUNTRY OF MANUFACTURE | Thailand |
| HORSEPOWER | 6hp |
| SHAFT LENGTH | 15″ (Short) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 138 cc (8.4 cubic inches) |
| BORE AND STROKE | 2.38 x 1.89 inches |
| FULL THROTTLE RPM RANGE | 4750-5750 RPM |
| IGNITION SYSTEM | Digital Capacitor Discharge Ignition System |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (87 octane) |
| FUEL TANK / FUEL LINE | .26 US Gallon Integral Fuel Tank |
| OIL TYPE | SAE 10W-30 or SAE 10W-40 |
| OIL CAPACITY | 24 fl oz. (700 mL) |
| LUBRICATION | Wet Sump |
| ALTERNATOR | Optional 12V 5A (installation required) |
| COOLING SYSTEM | Water-Cooled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 1.92:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (starboard side lever) |
| PROPELLER | 3-Blade Aluminum 7.5″ Dia x 7.0 ” Pitch |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns