In Stock
Suzuki 6 HP DF6AL2
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Suzuki's 6 HP DF6AL2 uses a 20-inch long shaft with tiller steering and manual start, weighing 54.0 lb, and carries the Suzuki 3-year warranty.
Fuel options
Run time on the built-in tank is about 45 minutes at full throttle from its quarter-gallon capacity, and the engine also has a ready connection for an external tank if you want longer range between fill-ups on a longer day out. The carburetor-fed single cylinder meets a 3-star ultra-low emission standard.
Handling and control
The tiller folds down for storage, and a twist-grip throttle with a tension adjuster sits alongside a large gear shift lever on the handle. Steering friction can be tightened to hold a course without constant hand pressure on open water, and the gear shift moves cleanly through forward, neutral and reverse.
Protection built in
The motor carries over-rev and low oil pressure protection along with an emergency lanyard stop switch, and multi-layer corrosion protection covers the block for saltwater use, which matters most after a day running in salt spray. A single cylinder keeps the overall package simple to maintain.
How long does the built-in tank last at full throttle? About 45 minutes on a quarter gallon. Can an external tank be added? Yes, a ready connection is built into the engine for one, which helps on a longer outing.
Specifications
| MODEL | DF6AL2 |
|---|---|
| SKU | DF6AL2-20 |
| WEIGHT | 54.0 lb |
| MANUFACTURER | Suzuki |
| COUNTRY OF MANUFACTURE | Thailand |
| HORSEPOWER | 6hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Manual |
| TRIM & TILT | Manual |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | Internal |
| CYLINDER(S) | 1 |
| DISPLACEMENT | 138 cc (8.4 cubic inches) |
| BORE AND STROKE | 2.38 x 1.89 inches |
| FULL THROTTLE RPM RANGE | 4750-5750 RPM |
| IGNITION SYSTEM | Digital Capacitor Discharge Ignition System |
| INDUCTION SCAVENGING | OHV |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (87 octane) |
| FUEL TANK / FUEL LINE | .26 US Gallon Integral Fuel Tank |
| OIL TYPE | SAE 10W-30 or SAE 10W-40 |
| OIL CAPACITY | 24 fl oz. (700 mL) |
| LUBRICATION | Wet Sump |
| ALTERNATOR | Optional 12V 5A (installation required) |
| COOLING SYSTEM | Water-Cooled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 1.92:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (starboard side lever) |
| PROPELLER | 3-Blade Aluminum 7.5″ Dia x 7.0 ” Pitch |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns