In Stock
Suzuki 30 HP DF30ATL2 Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Suzuki's 30 HP DF30ATL2 puts steering and throttle on a console instead of a tiller handle, running the same long shaft as its tiller-steered sibling with power trim and tilt added at the stern.
Remote steering, electric start with backup
Electric start handles normal starting, and a manual pull cord stays on board as a backup if the battery is ever dead, so you are not stranded by a flat charge. A console carries the throttle and shift rather than the engine itself, which suits boats already rigged for helm steering. The shaft on this version measures 20 inches, built for a deeper transom than Suzuki's shorter portables.
Running range
Full throttle on this four-stroke spins between 5300 and 6300 rpm, turning a 10.25 by 12 inch propeller matched to this configuration. Fuel injection on this engine does not rely on the boat's battery to meter fuel, and spark comes from a digital module rather than a set of points.
Care and protection
An over-rev limiter and low oil pressure warning are built in, and the gear ratio of 2.09 to 1 shifts cleanly through forward, neutral and reverse.
What backs up the electric starter? A manual pull cord, kept on board in case the battery is unavailable. How is this one steered? By remote controls at the helm console, not a tiller handle at the transom.
Specifications
| Model | DF30ATL2 |
| Model Year | No |
| SKU | DF30ATL2-17 |
| Weight | 158.0000 |
| Manufacturer | Suzuki |
| Country of Manufacture | Thailand |
| Horsepower | 30hp |
| Shaft Length | 20″ (Long) |
| Steering | Remote |
| Starting | Electric |
| Trim & Tilt | Power Trim & Tilt |
| Fuel Delivery | EFI |
| Fuel Tank | External |
| Cylinder(s) | 3 |
| Displacement | 29.8 (489) |
| Bore and Stroke | 2.80 x 2.68 () |
| Full Throttle RPM Range | 5300-6300 |
| Ignition System | Digital CDI |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 4 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | Yes |
| Oil Type | SAE 10W-30 or SAE 10W-40 |
| Oil Capacity | 1.6 (1.5) |
| Lubrication | Wet Sump; Trochoid Type Cam-Driven Oil Pump |
| Alternator | Electric 12V 14A |
| Cooling System | Water-Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.09:1 |
| Gear Shift | Forward-Neutral-Reverse |
| Propeller | 3 x 10.25 x 12 |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns