In Stock
Suzuki 30 HP DF30ATHL2 Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Suzuki's 30 HP DF30ATHL2 joins tiller steering with push-button electric starting and a 20-inch long shaft, adding power trim and tilt and turning a 10.25 by 12 inch propeller.
Tiller control at 30 HP
Running throttle and steering from one tiller handle keeps rigging simple on boats without a console, and the long shaft suits a deeper transom than Suzuki's short-shaft portables. Full throttle runs between 5300 and 6300 rpm on this four-stroke engine, and the fuel injection system does not depend on an onboard battery to meter fuel.
Starting and trim
Electric start handles everyday use here, and trim and tilt answer to a switch on the tiller rather than a manual lever, which matters more as horsepower and weight climb past the smaller portable classes. Spark timing is handled by a digital ignition module across the operating range.
Protection and care
The engine guards against over-revving and keeps watch on oil pressure, warning before trouble starts. Rinsing the block with fresh water after a day out is straightforward thanks to a built-in flushing connection, which helps the engine hold up to repeated saltwater use over the years.
Does this motor run on a tiller or remote controls? Tiller, with the throttle built into the handle. Is trim adjustment manual? No, it is powered by a switch rather than a hand lever.
Specifications
| Model | DF30ATHL2 |
| Model Year | No |
| SKU | DF30ATHL2-17 |
| Weight | 163.0000 |
| Manufacturer | Suzuki |
| Country of Manufacture | Thailand |
| Horsepower | 30hp |
| Shaft Length | 20″ (Long) |
| Steering | Tiller |
| Starting | Electric |
| Trim & Tilt | Power Trim & Tilt |
| Fuel Delivery | EFI |
| Fuel Tank | External |
| Cylinder(s) | 3 |
| Displacement | 29.8 (489) |
| Bore and Stroke | 2.80 x 2.68 () |
| Full Throttle RPM Range | 5300-6300 |
| Ignition System | Digital CDI |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 4 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | Yes |
| Oil Type | SAE 10W-30 or SAE 10W-40 |
| Oil Capacity | 1.6 (1.5) |
| Lubrication | Wet Sump; Trochoid Type Cam-Driven Oil Pump |
| Alternator | Electric 12V 14A |
| Cooling System | Water-Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.09:1 |
| Gear Shift | Forward-Neutral-Reverse (front-mounted lever) |
| Propeller | 3 x 10.25 x 12 |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns