In Stock
Suzuki 250 HP DF250APXW2
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The white-finished DF250APXW2 carries that same 245.6 cubic inch V6, weighing in at 639 lb on a 25-inch shaft.
Choosing a finish
White cowling tends to get picked to match a lighter hull color or existing hardware on the boat rather than for any performance reason, since the block, electrical system and shaft length underneath do not change between finishes in this model. Decide on color based on how the rest of your transom looks.
Rigging as single or twin
Standard and counter rotation are both offered here, which means a single install or a matched twin pairing both work from this one listing, with the props turning opposite ways in a twin setup. Suzuki Precision Control takes care of throttle and shift duties electronically, while trim and tilt respond to their own control, separate from the console.
Charging and care
Electric start is standard, and a 54 amp alternator covers electronics and trim loads running together without straining the system. A flushing port is built in for running fresh water through the block after time in salt water, which helps the engine hold up over seasons of use.
Does the white finish change the mechanical specs? No, weight, shaft length and alternator output are shared with the black-finished version. Can this run as part of a twin rig? Yes, order the matching rotation for the other side.
Specifications
| Specification Attributes | |
|---|---|
| HP | 250 HP |
| Cylinders | V6 |
| Displacement | 245.6 CI |
| Starting | Electric |
| Controls | Suzuki Precision Control |
| Power Trim & Tilt | Power Trim & Tilt |
| Gear Shift | Forward, Neutral, Reverse |
| Propulsion | Counter Rotation |
| Propulsion | Standard Rotation |
| Weight | 639 |
| Alternator Output | 54 Amp |
| Color | White |
| Shaft Length | 25” |
| Family Type | 4-Stroke |
| Fuel Induction | EFI |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns