In Stock
Suzuki 25 HP DF25ATS Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The Suzuki 25 HP DF25ATS combines the short 15-inch shaft with remote steering, so throttle and shift sit at a console rather than on a tiller, plus power trim and tilt.
Engineering behind it
This engine uses an electronic fuel injection system that meters fuel without drawing on an onboard battery, built around a lean-burn tune aimed at stretching range from each tank rather than chasing top speed. The design targets quick starts and steady acceleration instead, and it suits boats already wired for console steering rather than a transom-mounted tiller.
Rigging notes
A side-mount control box and harness ship with this motor so it can be wired into a console-mounted throttle and shift, and the short shaft suits a shallower transom than a long-shaft, remote-steer motor would. At 10.25 by 11, the three-blade aluminum propeller matches this configuration's output.
Protection built in
Protection includes a limiter against over-revving and a warning for low oil pressure, and a digital ignition module handles spark timing throughout the operating range. A fresh water flush after a trip in salt water helps keep the block and fittings in good shape over time.
Is this tiller or remote steered? Remote, with a side-mount control box and harness included. Does the fuel system need a battery? No, it runs on its own self-contained electrical system.
Specifications
| Model | DF25ATS |
| Model Year | No |
| SKU | DF25ATS-17 |
| Weight | 156.0000 |
| Manufacturer | Suzuki |
| Country of Manufacture | Thailand |
| Horsepower | 25hp |
| Shaft Length | 15″ (Short) |
| Steering | Remote |
| Starting | Electric |
| Trim & Tilt | Power Trim & Tilt |
| Fuel Delivery | EFI |
| Fuel Tank | External |
| Cylinder(s) | 3 |
| Displacement | 29.8 (489) |
| Bore and Stroke | 2.80 x 2.68 () |
| Full Throttle RPM Range | 5000-6000 |
| Ignition System | Digital CDI |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 4 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | No |
| Oil Type | SAE 10W-30 or SAE 10W-40 |
| Oil Capacity | 1.6 (1.5)L |
| Lubrication | Wet Sump; Trochoid Type Cam-Driven Oil Pump |
| Alternator | Manual 12V 14A / Electric 12V 14A |
| Cooling System | Water-Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.09:1 |
| Gear Shift | Forward-Neutral-Reverse (front-mounted lever) |
| Propeller | 3 x 10.25 x 11 |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns