In Stock
Suzuki 25 HP DF25ATL Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Suzuki's 25 HP DF25ATL moves steering and throttle off the motor entirely, wiring in remote controls at the helm, paired with a 20-inch long shaft and power trim and tilt.
Remote control setup
A side-mount control box and harness ship standard with this motor so throttle and gear shift sit at a console rather than on the engine itself, which suits small sailboats, skiffs and jon boats steered from a fixed helm position rather than from the transom. The long shaft matches a deeper transom than the short-shaft, tiller-steered motors in this lineup.
Power and propeller
Electric start is standard, and the trim and tilt angle is set from the console rather than by hand at the back of the boat. The propeller for this configuration is a 9.25 by 10 inch three-blade unit, sized specifically for this rigging.
In the box
Suzuki packs in a 6-gallon external fuel tank and line, a tool kit, the owner's manual, and the 3 year factory warranty with this motor. A fresh water flush after running in salt water is worth adding to your routine, and the control box harness simplifies wiring the throttle into most console layouts.
Does this version use a tiller? No, steering and throttle run through remote controls with a side-mount box and harness. What propeller size does it use? A three-blade unit, 9.25 by 10 inches.
Specifications
| Model | DF25ATL |
| Model Year | No |
| SKU | DF25ATL-17 |
| Weight | 158.0000 |
| Manufacturer | Suzuki |
| Country of Manufacture | Thailand |
| Horsepower | 25hp |
| Shaft Length | 20″ (Long) |
| Steering | Remote |
| Starting | Electric |
| Trim & Tilt | Power Trim & Tilt |
| Fuel Delivery | EFI |
| Fuel Tank | External |
| Cylinder(s) | 3 |
| Displacement | 29.8 (489) |
| Bore and Stroke | 2.80 x 2.68 () |
| Full Throttle RPM Range | 5000-6000 |
| Ignition System | Digital CDI |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 4 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | No |
| Oil Type | SAE 10W-30 or SAE 10W-40 |
| Oil Capacity | 1.6 (1.5) |
| Lubrication | Wet Sump; Trochoid Type Cam-Driven Oil Pump |
| Alternator | Manual 12V 14A / Electric 12V 14A |
| Cooling System | Water-Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.09:1 |
| Gear Shift | Forward-Neutral-Reverse (front-mounted lever) |
| Propeller | 3 x 9.25 x 10 |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns