In Stock
Suzuki 20 HP DF20ATL Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Steering and shifting move off the motor entirely on the DF20ATL, run instead through a side-mount control box, paired with Suzuki's 20 HP engine, a long shaft, electric start, and power tilt.
What to check before buying
This is a console-rigged motor rather than a tiller model, so confirm your boat already has, or can take, remote steering before ordering; the included harness connects the control box to the engine, though a separate steering link arm and cable are needed to finish the hookup. The engine underneath runs digital CDI timing and a 2.08-to-1 gear ratio, shifted through the control box itself.
What's packed in
The side-mount control box arrives with its wiring harness, alongside a 3.1-gallon fuel tank, fuel line, and transom mounting hardware. A propeller, printed manual, and tool kit round out the crate, with Suzuki's 3-year warranty covering the engine.
Common questions
Is there a tiller on this motor? No; steering and shifting both run through the included side-mount control box.
Are steering cables included? The control box and harness come with it; a link arm and steering cable still need sourcing to finish the install.
Power tilt on this version works the same way as it does on the tiller-steered DF20ATHL2, raising and lowering the motor at a switch rather than a hand lever. Measure the distance from your console to the transom before ordering cables, since the harness included here only covers the control box end of the run.
Specifications
| Model | DF20ATL |
| Model Year | No |
| SKU | DF20ATL-17 |
| Weight | 120.0000 |
| Manufacturer | Suzuki |
| Country of Manufacture | Thailand |
| Horsepower | 20hp |
| Shaft Length | 20″ (Long) |
| Steering | Remote |
| Starting | Electric |
| Trim & Tilt | Power Tilt |
| Fuel Delivery | EFI |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 327 cc (20.0 cubic inches) |
| Bore and Stroke | 60.4 x 57 mm (2.38 x 2.24 inches) |
| Full Throttle RPM Range | 5300-6300 RPM |
| Ignition System | Digital CDI |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | INCLUDED: 3.1 Gallon Fuel Tank and Fuel Line |
| Oil Type | SAE 10W-30 or SAE 10W-40 |
| Oil Capacity | 33.8 fl oz. (1000 mL) |
| Lubrication | Wet Sump; Trochoid Type Cam-Driven Oil Pump |
| Alternator | 12V 145W 10A |
| Cooling System | Water-Cooled |
| Saltwater Rated | YES |
| Gear Ratio | 2.08:1 |
| Gear Shift | Forward-Neutral-Reverse (side mount control box) |
| Propeller | 3-Blade Aluminum 10.25″ Dia x 9.0″ Pitch |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns