In Stock
Suzuki 115 Hp 4 stroke Outboard
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Despite what the listing title might suggest, this Suzuki 115 HP outboard runs a genuine four-stroke design, with DOHC 16-valve architecture and multi-point sequential fuel injection across four cylinders, set up with electric start and remote steering on a 20-inch shaft.
What to check before buying
A tiller kit is offered as an optional add-on for this engine rather than standard equipment, since it ships with remote steering by default, so confirm which setup matches your boat before ordering. Displacement runs 124.7 cubic inches, with a bore and stroke of 3.40 by 3.50 inches, turning through a 2.59-to-1 gear ratio up to an operating range between 5,000 and 6,000 rpm.
Electrical and oiling
Solid-state ignition pairs with a 40-amp alternator for onboard charging, and the oil pan holds 5.8 quarts, with power trim and tilt handling the trim method. Optional propeller pitches of 15 or 26 are available, and this unit is sold new, weighing 401 pounds.
Common questions
Does it come with a tiller? Steering is remote by default; a tiller kit is available as a separate option.
What fuel system does it run? Multi-point sequential electronic fuel injection across all four cylinders.
Is this new or used? This unit is sold new, regardless of how the listing title reads.
At 401 pounds, this sits toward the heavier end for a 115 HP outboard, worth weighing against your boat's rated transom capacity before ordering.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns