Esab EM 210 MIG Only Welder (0700501200)

This is a MIG-only machine rated for 200 amps of output at just 28.7 pounds, built for dual-voltage use between 115 and 230 volts. It is not set up for stick or TIG work, so confirm MIG is the only process you need before ordering.

Setup and control

Voltage and amperage are each adjusted with a single infinite dial rather than stepped settings, which keeps setup simple for less experienced users. Spool-gun detection is automatic, so switching to aluminum wire does not require a separate manual setup step, and the machine is rated to run from a 10kW generator when shop power is not available.

What ships with it

• A MIG gun rated to accept common consumables, plus a separate electrode holder and ground clamp
• An argon/CO2 regulator with gas hose, a 115V/230V power adapter, and a 2-pound spool of wire
• Maximum plate thickness is rated at 3/8 inch, with wire feed speed from 80 to 450 inches per minute
• Duty cycle is rated 40 percent at 90 amps on 115V and 15 percent at 200 amps on 230V

Shipping weight is 28.7 pounds, with a 19.2-inch length and 15-inch height. ESAB covers this new unit for 3 years; it's built for home/hobby and light-industrial shops running single-phase power.

Can this machine TIG or stick weld? No, it is built for MIG only.

Can I run it from a portable generator? Yes, it is rated to operate from a 10kW generator.

Specifications