In Stock
Cruise 3.0 RL
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The Cruise 3.0 RL is Torqeedo's entry-level electric outboard for dinghies and sailboats up to 3 tons, putting out roughly what a 6 hp petrol motor would. One Power 24-3500 lithium pack, purchased on its own, is the battery this motor is built around; it mounts on remote steering with an electric starter and a 30-inch long shaft. The bare motor comes in at 43 lbs, with that matched battery adding another 56 lbs.
Running it
Torqeedo rates the housing to IP67 and seals the drivetrain against saltwater corrosion for the kind of extended commercial-style use that includes the occasional grounding on a hard bottom. Lead-gel or AGM lead batteries can substitute for the lithium pack, with the trade-off that the onboard display stops reporting battery capacity once a lead battery is fitted in place of Torqeedo's own.
Setup and compatibility
Standard equipment covers the remote steering cable run, a main switch, and a dedicated B 12 x 10 WDR propeller. Third-party 24-volt batteries can also run this motor as long as their output is matched to it, though Torqeedo still recommends its own pack as the default. Buying the motor on its own means the throttle, battery, and charger each need to be ordered separately.
Condition
Sold new; non-commercial use carries a 2-year warranty from Torqeedo.
What size boat is this for? Dinghies and sailboats up to 3 tons.
Is a battery included? No, a Power 24-3500 lithium pack or a matched lead battery is a separate purchase.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns