In Stock
2018 Tohatsu 9.8 Hp MFS9.8BEFTL Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Need power tilt on a long shaft? The 2018 Tohatsu 9.8 HP MFS9.8BEFTL combines a 20-inch shaft, electric start, and power-operated tilt across 5 trim positions, at roughly 105 lbs. It's built for boaters who want to raise and lower the motor at the push of a button rather than wrestling a manual tilt lever, while keeping the twin-cylinder four-stroke's quiet, fuel-efficient character.
What power tilt changes
Power tilt is driven off the same alternator that supports electric start, so plan your battery and charging setup with that extra draw in mind. The tilt mechanism gives 5 trim positions for dialing in running angle across different loads and speeds, a level of adjustment the manual-tilt versions in this family don't offer. Steering friction is adjustable for feel, and shifting stays simple with a forward-neutral-reverse control up near the cowl.
Matched propeller and fit
This long-shaft, power-tilt model swaps the standard three-blade aluminum wheel for a four-blade, high-thrust propeller, suited to heavier boats or those needing extra push at low speed. Confirm your transom height matches the 20-inch shaft, and check your wiring harness can support the power tilt circuit before installing. A full thru-cowl manual start is retained as a backup even with power tilt fitted.
Does it still start manually if needed? Yes, that backup is built in.
Warranty? Covered for 5 years by Tohatsu.
Specifications
| MODEL | MFS9.8BEFTL |
| MODEL YEAR | 2018 |
| SKU | MFS9.8BEFTL-18 |
| WEIGHT | 104.7000 |
| MANUFACTURER | Tohatsu |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 9.8hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Electric |
| TRIM & TILT | Power Tilt |
| FUEL DELIVERY | Carburetor |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 209 cc (12.8 cubic inches) |
| BORE AND STROKE | 55 x 44 mm (2.17 x 1.73 inches) |
| FULL THROTTLE RPM RANGE | 5,000-6,000 RPM |
| IGNITION SYSTEM | Digital CD Ignition |
| INDUCTION SCAVENGING | SOHC |
| VALVES PER CYLINDER | 2 |
| FUEL TYPE | Unleaded Gasoline (87 octane) |
| FUEL TANK / FUEL LINE | 3.1 Gal. Fuel Tank + Quick Connect Fuel Line |
| OIL TYPE | SAE 10W-30 or SAE 10W-40 (SF, SG, SH, SJ) |
| OIL CAPACITY | 27 fl. oz. (800 ml) |
| LUBRICATION | Wet Sump |
| ALTERNATOR | 12V 80W 6A (standard on elec. start models) |
| COOLING SYSTEM | Water-Cooled, Thermostatically Controlled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | Forward-Neutral-Reverse (front mount shifter) |
| PROPELLER | 8.7″ Dia. X 7.0″ Pitch 4-Blade (High Thrust) |
| INTERNAL BATTERY | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns