In Stock
2018 Tohatsu 20 Hp MFS20EEFTL Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Power tilt joins electric start on the 2018 Tohatsu MFS20EEFTL, the long-shaft, EFI version of the 20 hp tiller line. Where the manual-trim MFS20EEFL needs a hand lever to adjust running depth, this one trims through six positions at the touch of a switch.
What power tilt adds
Power tilt pays off most if you shift between shallow launch spots and open running water often, since you're not reaching for a lever each time; it adds weight and complexity over the manual-trim version but doesn't change the 20-inch shaft needed for your transom. This EFI engine's full-throttle band sits at 5,000 to 6,000 rpm from a 333cc block.
Fuel and charging
This one runs its own 3-gallon tank, close to 12 liters, feeding the EFI system through a dedicated hose rather than anything shared with the carbureted siblings. A 12-volt, 12-amp alternator backs up electric start by keeping the battery charged, and the engine is cleared for saltwater use.
Q: Does power tilt replace the need to check shaft length? No, tilt range and shaft length are separate matters; confirm your transom height regardless of which trim option you choose.
Tohatsu's 5-year warranty applies to the MFS20EEFTL. Between the power tilt and the EFI system, there's more to this motor electrically than the carbureted manual-tilt versions, so keep the battery terminals clean and tight for both systems to work reliably.
Specifications
| MODEL | MFS20EEFTL |
| MODEL YEAR | 2018 |
| SKU | MFS20EEFTL-18 |
| WEIGHT | 118.0000 |
| MANUFACTURER | Tohatsu |
| COUNTRY OF MANUFACTURE | Japan |
| HORSEPOWER | 20hp |
| SHAFT LENGTH | 20″ (Long) |
| STEERING | Tiller |
| STARTING | Electric |
| TRIM & TILT | Power Tilt |
| FUEL DELIVERY | EFI |
| FUEL TANK | External |
| CYLINDER(S) | 2 |
| DISPLACEMENT | 333 cc (20.32 cu. in.) |
| BORE AND STROKE | 61 57 mm (2.4 x 2.24 in.) |
| FULL THROTTLE RPM RANGE | 5,000-6,000 RPM |
| IGNITION SYSTEM | No |
| INDUCTION SCAVENGING | No |
| VALVES PER CYLINDER | No |
| FUEL TYPE | Unleaded Gasoline (87 Octane) |
| FUEL TANK / FUEL LINE | 3 gal. (12 liter) Separate Tank |
| OIL TYPE | Tohatsu 4 Stroke Outboard Motor Oil |
| OIL CAPACITY | No |
| LUBRICATION | No |
| ALTERNATOR | 12V-12A |
| COOLING SYSTEM | Water-Cooled, Thermostatically Controlled |
| SALTWATER RATED | Yes |
| GEAR RATIO | 2.15 |
| GEAR SHIFT | F-N-R |
| PROPELLER | 3 blade aluminum |
| INTERNAL BATTERY | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns