In Stock
2017 Tohatsu 9.8 HP MFS9.8BEFUL Outboard Motor
- ISPM 15 heat-treated Euro palletized & weatherproof shrink-wrapped
- Insured European road freight delivery with hydraulic tail-lift service
- Dispatches in 1–2 business days from our UK & European Logistics Centre
- Transit typically 1–3 business days (UK) / 3–6 business days (Continental Europe)
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
This 2017 Tohatsu 9.8 HP MFS9.8BEFUL carries the extra-long, 25-inch shaft in the lineup, built for transoms the shorter shafts elsewhere in this family can't reach. Tohatsu's spec sheet lists 92.6 lbs for this configuration, running electric start alongside manual trim and tilt adjustment, and describes the 9.8 hp line as the smaller 8 hp engine's equivalent plus a larger carburetor and propeller for added power.
Choosing this shaft length
A 25-inch shaft is meant for boats where the transom sits unusually high above the waterline, commonly sailboats with a deep auxiliary well. Getting shaft length wrong is one of the most common fitting mistakes on an outboard this size, so confirm your own measurement against this 25-inch figure before ordering rather than guessing from the hull type alone.
What's different about this version
It runs a four-blade, high-thrust propeller instead of the three-blade wheel fitted to shorter-shaft siblings, which suits heavier, slower-moving boats. Tiller steering, a simple forward-neutral-reverse shifter, and an adjustable steering friction setting round out the controls. Fuel delivery stays carbureted, the same single-barrel setup feeding both cylinders across the rest of the 9.8 hp family, and cooling remains water-based, thermostatically controlled, and rated for saltwater.
Is a fuel tank included? Yes, with a quick-connect fuel line.
How long is the warranty? Tohatsu backs it for 5 years.
Specifications
| Model | MFS9.8BEFUL |
| Model Year | 2017 |
| SKU | MFS9.8BEFUL-17 |
| Weight | 92.6000 |
| Manufacturer | Tohatsu |
| Country of Manufacture | Japan |
| Horsepower | 9.8hp |
| Shaft Length | 25″ (Extra Long) |
| Steering | Tiller |
| Starting | Electric |
| Trim & Tilt | Manual |
| Fuel Delivery | Carburetor |
| Fuel Tank | External |
| Cylinder(s) | 2 |
| Displacement | 209 cc (12.8 cubic inches) |
| Bore and Stroke | 55 x 44 mm (2.17 x 1.73 inches) |
| Full Throttle RPM Range | 5,000-6,000 RPM |
| Ignition System | Digital CD Ignition |
| Induction Scavenging | SOHC |
| Valves per Cylinder | 2 |
| Fuel Type | Unleaded Gasoline (87 octane) |
| Fuel Tank / Fuel Line | 3.1 Gal. Fuel Tank + Quick Connect Fuel Line |
| Oil Type | SAE 10W-30 or SAE 10W-40 (SF, SG, SH, SJ) |
| Oil Capacity | 27 fl. oz. (800 ml) |
| Lubrication | Wet Sump |
| Alternator | 12V 80W 6A (standard on elec. start models) |
| Cooling System | Water-Cooled, Thermostatically Controlled |
| Saltwater Rated | Yes |
| Gear Ratio | 2.08:1 |
| Gear Shift | Forward-Neutral-Reverse (front mount shifter) |
| Propeller | 8.7″ Dia. X 5.0″ Pitch 4-Blade (High Thrust) |
| Internal Battery | No |
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns